Trial listen request for MLTL Altec or GPA 604 speaker

[Altec Best]

Yo AB
If you're interested my MLTL dimension are 44"H X 24"Deep X 19" Wide.

This is my 3rd MLTL cab :
1st were smaller 44"X20"X19" in MDF
2nd were 44"X24"X19" MDF they were destroyed by Flood of 2006
now these 44"X24"X19" in Baltic Birch much nicer sound !

Yes the Baltic Birch Ply is much better sounding than MDF to me too.And it looks like you used finger joints on the corner/edges as opposed to rabbit joints very nice detail.Looks real nice Will.

[mephitis]

What does MLTL stand for?

[Earl K]

MLTL = Mass Loaded Transmission Line .

Enter MLTL into Google, for a lot of "hits" .

[lowtherdream]

Yo AB
If you're interested my MLTL dimension are 44"H X 24"Deep X 19" Wide.

This is my 3rd MLTL cab :
1st were smaller 44"X20"X19" in MDF
2nd were 44"X24"X19" MDF they were destroyed by Flood of 2006
now these 44"X24"X19" in Baltic Birch much nicer sound !

Panny :
Yeah I know you have an A5 system too. There is something about a multicell horn
that does wonders of mid-range! I find myself listening to the A5 system a lot
because it sounds so REAL !

Have fun!
Willie

Hi Willie, very interesting build. I am comtempleting building speakers with the 604-8H-iii and still did not decide which cabinet to use. Yours is very interesting. Did you design it yourself or go the plans from GPA? What about the xovers... stock GPA or modified?

thanks,

Claudio

[Altec Best]

Claudio, I don't think Willie is here that much.. You might try and send him a PM.